Table of Contents
Overview
Think of an engine that runs your motorcar, or bike. If you want to know the health of your vehicle, you must keep the oil in check. Especially while the transmission is done, it is vitally important to know the level of the oil as well as its quality. The quality can be checked by an oil dipstick. But in many latest model cars, you do not find a dipstick.
For good quality and level checking of your oil, you still need the old-book solution. And with CNC machining, you may create custom dipsticks as you like.
The function of a Dipstick
A dipstick is a measuring device. It is a stick-like device that has marks imprinted on it. Most of the time it is made out of metal. Especially engine dipsticks are always made of metals. It is used to measure the liquid remaining in a tank or any other carrying items. Car dipsticks are specially prepared to measure the oil remaining in the fuel tank.
A car dipstick is marked with measuring indicators like pinholes, MIN or MAX, H for high and L for the low levels of the oil, etc.
And most of the car dipsticks have a ring-like handling tool on one side.
You can measure the oil level and quality of oil in the engine by dipping the dipstick in the tanker while the car is hot or cooled down – according to the direction you may find in your car manual.
It is a very useful item if you want to measure your engine oil level every now and then. With CNC dipsticks, the measurement of oil level can be measured accurately.
Dipstick Is Essential for Every Car
To measure the transmission fluid, all the early model cars came with a dipstick in the engine. But for the latest model cars, most of them do not have a dipstick with them. Rather they have electronic gauges or sensors. The sensor only shows the oil level when it is too low. On the other hand, an electronic gauge shows the oil level, but it is difficult to measure the oil quality in the car with an electronic gauge.
So, nowadays, most of the new cars do not come with a dipstick with them.
The Location of the Oil Dipstick on a Car
You can find the oil dipstick inside the engine hood. Although most modern cars do not come with an oil dipstick if you have one you will most probably find it on the left side of the engine.
It has a flashy handle, typically yellow or orange as a ring.
When you find it, you can directly pull it out. A long rod will come out. The oil dipstick must have measuring indicators on it.
The Universality of Dipsticks
Dipsticks are not universal and even for the same type of vehicle, they come in different shapes and sizes from time to time. You can not but get astonished if you try to find out how many types of dipsticks there are for vehicles. Some have cable-like figures, some are straight with a twisty root and some are just like cables attached with a handle at the end.
Different dipsticks come in different shapes and for different reasons. If it needs avoiding straight go then it has a twisty end. Sometimes, for too much depth you may need a cable-type dipstick. If you do modify your car engine, then you may need to change the default dipstick too.
Universality of Custom Dipsticks
Although there are many kinds of dipsticks all around the world and dipsticks are not universal, still you can use CNC machining to manufacture Universal Custom Dipsticks for the best use on different cars.
The Universal custom dipsticks are pretty useful and can fit most cars giving you accurate measures of the oil level as well as oil quality.
These universal custom dipsticks produced by CNC machining are different in looks and parts from normal dipsticks. They contain various parts that help them to work with different vehicles without any trouble.
For example, a universal custom dipstick may use a custom funnel adapter that may help it to fit with different vehicles.
Custom Length Dipstick
Custom length dipsticks are the ones according to special customization by CNC machining. The length depends on the need and demands you may provide.
Usually, you can adjust the length of a custom length dipstick according to your need. Most of them are made of plastic and metal. It can also be of full metal if you want them to be.
The flexibility of these dipsticks makes them popular among users.
Benefits of Using Custom Dipsticks
Custom dipsticks produced by CNC machining give you a lot of choices to make. You can customize them any way you need them to be like –
- You can change the clock
- You can make the length adjustable
- You can even change the speed of the transmission swap
Yes, you can customize a dipstick with a multi-piece transmission tube and make the swap more speedy.
As a result, a custom dipstick can give you the best comfortability while you are measuring your oil level and the quality of the oil for your car.
Materials Used to Made Custom Dipsticks
Most dipsticks are made of plastic and metal. Sometimes you also use dipsticks made of full metal. 
But the custom dipsticks come with lots of variety even when it comes to metal.
Steel and Aluminum are the two metals mostly used to produce custom dipsticks.
For a good finishing, Aluminum alloy and Stainless steel are often used in custom dipsticks. Aluminum has more flexibility and durability to work with. As a result, most of the CNC machining custom dipsticks are made of Aluminum or Aluminum alloy.
Manufacturing Process of Custom Dipsticks
First, you need a design of the custom dipstick you want. You can create the blueprints yourself, with your designers or you can take help from the CNC machining engineers for creating the designs.
After that, you need to select the materials you need for your custom dipstick. You can provide the material or the CNC machining endeavor can provide you with that. Either way, you should choose the materials – like plastic for plastic parts, aluminum alloy or stainless steel or aluminum or steel, whichever you think fits.
Guidance for Custom Dipsticks From Manufacturers
When it comes to custom dipsticks, the manufacturers should be approached following a systematic procedure. First off, establish your precise needs on the length of material and markings. Work with the manufacturer on finding the best material, which will be influenced by consideration of the application and type of fluid. Discuss customization options like measurement notations or any extra features relevant to your requirements. Close cooperation on the design of a dipstick, and use of prototyping services if required for testing.
Since quality is very critical, make sure the manufacturing firm complies with the stringent quality control procedures and accepts to the applicable industry standards. Ask about the proper usage and maintenance to ensure the best performance. Finally, remember what the industry regulates and work with the manufacturers to comply. These steps and efficient communication will allow you to get the accurate custom dipsticks while preserving quality and reliability.
Conclusion
Custom dipsticks are handy and easy to use. If you need to keep the lubricant quality and quality in check for the better health of your car, a custom dipstick is a good choice. With CNC machining them, you can give them any shape, color, and material you want.
